title-navbar
title-navbarsubtitle-navbar
search
  • MyBayer
    • Brand LogoHerbicide

    XtendiMax 2 with VaporGrip Technology

    XtendiMax® 2 herbicide with VaporGrip® Technology is a higher-concentrated formulation of XtendiMax® herbicide with VaporGrip Technology. Your Roundup Ready 2 Xtend® and XtendFlex® soybeans can continue to get the same field-proven weed control they need, now with the convenience of covering more acres per jug. XtendiMax 2 herbicide with VaporGrip Technology is designed for use with the Roundup Ready® Xtend Crop System. Its low volatility formulation provides the perfect tank-mix partner for Roundup® brand herbicides to make sure your Roundup Ready soybean crop gets the weed control it needs.
    fact_check

    fs-approved-use: AB, BC, MB, NB, NL, NS, ON, PE, QC, SK

    info_outline

    fs-bayervalue-banner-section

    fs-herbicide-button-label

    title-product-highlights

    •

    Higher concentrated formulation

    •

    Same trusted control as the original XtendiMax herbicide with VaporGrip Technology

    •

    Reduces early weed competition through short-term residual control of small seeded broadleaf weeds

    •

    Reduced volatility through VaporGrip Technology

    •

    Unlocks full potential of Roundup Ready Xtend Crop System

    •

    Fights against herbicide resistance (including control of glyphosate-resistant weeds)

    •

    Simple and economical to use

    •

    Helps manage weed resistance by adding another effective mode of action to Roundup

    product-details-heading

    cropscategorygroups-active-ingredientsformulation-typepackaging
    •

    Soybeans

    •

    Corn

    •

    Cereals

    •

    Broadleaf

    4 Dicamba

    Water soluble herbicide

    •

    10 L jug

    •

    450 L tote

    crops
    •

    Soybeans

    •

    Corn

    •

    Cereals

    category
    •

    Broadleaf

    groups-active-ingredients

    4 Dicamba

    formulation-type

    Water soluble herbicide

    packaging
    •

    10 L jug

    •

    450 L tote

    weeds-controlledweeds-suppressed
    •

    Field bindweed

    •

    Tartary buckwheat

    •

    Wild buckwheat

    •

    Canada fleabane

    •

    Non-glyphosate tolerant canola

    •

    Foxtail barley

    weeds-controlled
    •

    Field bindweed

    •

    Tartary buckwheat

    •

    Wild buckwheat

    •

    Canada fleabane

    •

    Non-glyphosate tolerant canola

    weeds-suppressed
    •

    Foxtail barley

    labels-sds

    Performance Data

    Slide 1 of 1
    Canada Fleabane Control CarouselImageSlide

    Canada Fleabane Control

    Source: 9 Canada Market Development Trials (2018 and 2019).

    Treatments were spring applied at the time of burndown and planting. Preominate species rated were Canada fleabane, kochia, lamb's-quarters and redroot pigweed. All rates are ai-ae/ha.

    XtendiMax 2 herbicide with VaporGrip Technology delivers the same level of control as XtendiMax herbicide with VaporGrip Technology.

    Your results may vary depending on agronomic, environmental and pest pressure variables.

    title-use-mixing

    title-use-mixing
      table-content-pests-herbicidetable-content-stagetable-content-ratetable-content-notes
      Please refer to label for complete list of weeds controlled and suppressed.
      		Up to V2 stage
      		0.5 L/ac.
      		The 0.5 L/ac. can be used only once in a season.

      Use nozzles and operating pressures that produce extremely coarse to ultra-coarse droplets to minimize drift
      Target weeds less than 10 cm tall
      Maintain boom height 50 cm above crop canopy or target weeds to reduce the risk of drift
      Optimal wind speeds for application typically occur between 5 and 15 km/h
      Maintain the required label buffer to protect sensitive areas; do not spray if sensitive crops are downwind
      Ensure ground speed is less than 25 km/h
      Use a triple rinse sprayer clean-out procedure
      Do not use ammonium sulfate or ammonium-based additives in application
      Use a minimum carrier water volume of 10 gal./ac. or 15 gal./ac. if including a drift reduction additive

      table-content-phitable-content-grazingFeeding
      7-10 days for soybean forage and 13-15 days for soybean hay
      		DO NOT permit lactating dairy animals to graze fields within 7 days after application
      DO NOT harvest forage or cut hay within 30 days after application
      Withdraw meat animals from treated fields at least 3 days before slaughter

      Minimum 10 GPA (100 L/ha)
      (15 GPA if using a drift reduction additive (DRA))

    title-additional-guidelines

      A plant back interval of 120 days is required for those crops not on the XtendiMax 2 label.
      info

      Footnotes
      • For all application information including rates and timing please refer to the label

      Store above -10°C to remain in solution

      Resistance management recommendations
      For resistance management, XtendiMax 2 with VaporGrip Technology is a Group 4 herbicide. Any weed population may contain or develop plants naturally resistant to XtendiMax 2 with VaporGrip Technology and other Group 4 herbicides. The resistant biotypes may dominate the weed population if these herbicides are used repeatedly in the same field. Other resistance mechanisms that are not linked to site of action, but specific for individual chemicals, such as enhanced metabolism, may also exist. Appropriate resistance-management strategies should be followed.
      To delay herbicide resistance:
      - Where possible, rotate the use of XtendiMax 2 with VaporGrip Technology or other Group 4 herbicides within a growing season (sequence) or among growing seasons with different herbicide Groups that control the same weeds in a field
      - Use tank mixtures with herbicides from a different Group when such use is permitted. To delay resistance, the less resistance-prone partner should control the target weed(s) as effectively as the more resistance-prone partner
      - Herbicide use should be based on an integrated weed management program that includes scouting, historical information related to herbicide use and crop rotation, and considers tillage (or other mechanical control methods), cultural (for example, higher crop seeding rates; precision fertilizer application method and timing to favour the crop and not the weeds), biological (weed-competitive crops or varieties) and other management practices
      - Monitor weed populations after herbicide application for signs of resistance development (for example, only one weed species on the herbicide label not controlled). If resistance is suspected, prevent weed seed production in the affected area if possible by an alternative herbicide from a different Group. Prevent movement of resistant weed seeds to other fields by cleaning harvesting and tillage equipment when moving between fields, and planting clean seed
      - Have suspected resistant weed seeds tested by a qualified laboratory to confirm resistance and identify alternative herbicide options
      - Contact your local extension specialist or certified crop advisors for any additional pesticide resistance-management and/or integrated weed-management recommendations for specific crops and weed biotypes

    recommended-agronomy-resources

    featured
    ARTICLE

    Roundup - FAQ

    featured
    ARTICLE

    Soybean Growth and Development

    featured
    ARTICLE

    Cereal Growth Stages and the Application of Herbicides and Fungicides

    MyBayer

    Log in to your account to see your BayerValue™ Rewards details, past purchases, and more.
    launchLog In
    article image